 Taillight Converter with Circuit Protection adds integrated short circuit protection that safeguards itself and the tow vehicle against harmful electrical shorts and mis-wire situations. The unit is rated for up to 2.1 amps for Turns/Stops circuits and 5 amps for the taillight circuit. Includes 18” blunt leads & 4-Flat with 60” lead. $30.00 |  For over a decade the 400 series converter has been the standard of excellence in the industry. Each unit is encased in a rugged anodized aluminum housing and features 24” long lead wires on both ends allowing ease of installation. Converts the three bulb system of the towing vehicle to the two wire system of the towed vehicle. (3 to 2 wire) $40.00 |
 TAIL LIGHT CONVERTER AM2
The AM-2 Taillight Converter is a 2-wire to 2-wire adapter designed to isolate the left and right stop/turn signals in a 2-wire towed vehicle. This will prevent feedback from occurring from the left to the right turn signals. $14.00 |  ZERO DROP CONVERTER- PL-100RX
The "Zero Drop" Taillight Converter´s internal power efficiency increases the light intensity of the towed vehicle by up to 25%, and the low power consumption extends converter life over solid-state units. The circuit isolation prevents feedback to towing vehicle computer system, reducing the risk of computer damage. For all 3-wire towing vehicles regardless of grounding systems or in-line computer sensors. Operates even when towing vehicle lamps are defective. Will not burn up even if the trailer lamps short out, improving safety. 3 to 2 wire. $30.00 |
 TAIL LIGHT CONVERTER PL100HD
The PL-100HD Converter enables the owner of a foreign or domestic car (equipped with the new separate and independent brake and turn light system) to easily adapt to the standard brake and turn trailer taillight systems commonly found on most camping and boat trailers.
The PL-100HD-4 Converter offers the same great features, and also includes a pre-wired 4-way flat car connector.
Stop signal completely cancelled by turn signal
Minimum connections, only 3 wires in-2 wires out (3 to 2 wire)
No holes to drill - pressure sensitive mounting
All solid state electronics, will drive dual #1157 lamps
Encapsulated in P-4000 polypropylene to pro- vide protection from extreme environments $15.00 |  TAIL LIGHT CONVERTER PL500R-PL-500R
The PL-500R Converter eliminates installation of special switches or wiring when towing a vehicle with separate and independent stop and turn lights. May be mounted at the front of most towed vehicles.
Isolates stop lights from turn signals
Maximum power transfer with no heating
No holes to drillPpressure sensitive mounting.
All solid state electronics.
Full year warranty. $30.00 |
 BRITE-LITE TAILLIGHT CONVERTER- 732
If you have thisQthe motorhome has separate brake and turn signal lights; the tow car has combined brake and turn signal lights.
Then you need thisQthe Brite-Lite Wiring Converter delivers more current to the towed vehicle´s brake and turn signal lights for brighter illumination. $57.00 |  TAILLIGHT CONVERTER 2 TO 3- 118158
2 to 3-Way Taillight Converters Allows RV´s and other vehicles with 2 wire systems to tow vehicles and trailers with 3 wire systems. Will not work with vehicles with LED´s. $26.00 |